Questions owners ask most

Short answers to the questions owners ask most about Technics KN-series keyboards, the KN7000 first, each pointing on to a fuller page.

These are the questions asked most often on owners’ forums from 2004 to 2026, roughly in order of how often. Source: Community report, 2004–2026

How do I get files from a computer onto the KN7000’s SD card?

The keyboard lists its own saves, and MIDI files (the common file type for songs that keyboards and computers share) brought in through its own import. Files dragged onto the card on a computer don’t show. Source: Community report, 2005–2026 MIDI files go in a folder named IMEXPORT on the card, and SD-SOUND IMPORT in SD TOOLS brings them in. Source: Manual, pp. 151–152 Owners make the folder at the top level of the card. Source: Community report, 2011–2019 Files in the keyboard’s own format, such as styles (the ready-made backing patterns) and panel memories (stored panel set-ups), go through a floppy: load them and save them to the card, or copy the whole floppy with COPY FROM DISK in SD TOOLS. Source: Manual, pp. 125, 139, 147, 151

More: Files copied from a computer don’t show on the card.

Which SD cards work in the KN7000?

Plain SD cards of 2 GB or less. SDHC cards, the larger kind from 4 GB up, aren’t recognised. Source: 30 community reports, 2007–2026 A 1 GB card works. Source: Tested on a KN7000 Owners report that a 2 GB card formatted in the keyboard shows as about 1 GB. Source: 6 community reports, 2009–2021 Some cards aren’t accepted at all, so try another. Source: 2 community reports, 2008–2015

More: The SD card isn’t recognised, shows too small or fills early and Prepare a new SD card.

Can I play MP3 or WAV files from the card?

Not as plain files. The card’s audio player plays only SD-Audio, a copy-protected format written to the card by the maker’s own software and card reader, which ran on older versions of Windows. Source: 20 community reports, 2005–2025 Plain MP3 or WAV files copied onto the card give error 86. Source: Community report, 2007–2008 Owners now play music from a phone or tablet into the LINE IN or AUX IN socket instead. Source: Community report

More: Error 86.

How do I back up my keyboard?

Save to a card. On the save screen, PERFORM selects all the performance data: the current panel, panel memories, recordings, styles in the composer (the style editor), edited sounds, performance pads (six buttons that play short phrases) and effect memories. BACKUP selects the backup data: the stored MIDI set-ups, the favourites, the home page and the custom styles (the styles kept in the 20 CUSTOM slots). Source: Manual, pp. 122, 132, 148 Then copy the whole card to a folder on a computer; copying it back onto an empty card has worked as a restore. Source: Community report, 2013 SD-Audio doesn’t survive the copy, and the factory styles and sounds need no backup: they’re always in the keyboard. Source: Community report, 2011–2014

More: Save your work to a card or floppy.

Which software version is the latest, and should I update?

The KN7000’s last versions are PROGRAM 1.6, the main software, and TABLE 1.4, the display and help texts. Source: Community report, 2005–2006 Owners with expansion boards, the add-on boards with extra sounds, report that 1.6 stopped crashes with the boards; without boards, owners disagree on whether it changes anything. Source: Community report, 2006–2018 The KN7000 updates from floppy disks only, not from the SD card. Source: Community report

How do I reset my KN7000 to factory settings?

Save everything to a card or floppy first. Source: Manual, pp. 197, 198 Then use the menu reset, INITIAL: press PROGRAM MENUS, choose CONTROL, then INITIAL, and choose the section to reset. It leaves the custom styles and the stored MIDI set-ups alone. Source: Manual, p. 197

More, including the manual’s power-on reset and when to use it: When and how to reset and Return settings to factory.

Why are my settings gone after switching off?

Without power, the KN7000 keeps the current panel, panel memories, edited sounds and effect memories for about a week. The sequencer (the built-in recorder), the composer and the performance pads last about 80 minutes, and the backup memory only protects changes once the keyboard has been on for about 10 minutes. Source: Manual, p. 198 If everything goes within minutes, the part that keeps the memory powered may be worn, and replacing it is a repairer’s job. Source: Community report, 2006–2018

More: Settings lost after switching off.

My floppy drive doesn’t work. What now?

Try a disk formatted in the keyboard itself, then a disk known to read in another keyboard or computer: on the KN7000, owners traced many “no disk” faults to the disk, not the drive. Source: 8 community reports, 2007–2022 On older models, owners also traced faults to dirty drive heads and worn drives. Source: Community report, 2010–2025 The KN7000’s SD card saves and loads the same data as its floppy drive. Source: Manual, p. 138 If keyboard-formatted disks fail too, ask a keyboard repairer. Source: Community report

More: The floppy drive says “no disk” or won’t read.

Which floppy disks does my model take?

The KN7000 takes 3.5-inch 2DD (720 KB) and 2HD (1.44 MB) disks. It can’t use a 2HD disk formatted as 2DD, and backup data needs a 2HD disk. Source: Manual, p. 122 Owners report that the KN800, KN1000 and KN2000 take 2DD disks only. Source: Community report, 2010–2015

More: The floppy drive says “no disk” or won’t read.

Which expansion boards are there, and which does my keyboard have?

Four wave expansion boards, EW01 to EW04, add sounds. Owners report that the KN7000 takes up to four of them, and the KN6000 and KN6500 two. Source: Community report Press EW EXPANSION: No Wave Expansion Board means none is fitted. Source: Community report, 2021 The manual says a dealer should fit them. Source: Manual, pp. 34–35

More: Expansion boards on the KN7000 page.

Will files from my old KN load on my new one?

Files move forward to newer models, not back. Source: Community report, 2006–2022 A KN7000 loads files from the KN6000, KN6500, KN5000, KN3000, KN2000, KN1600 and KN1400. Source: Reference Guide, pp. 54–55 A KN6000 refuses KN7000 files with error 00. Source: 2 community reports, 2011–2012 A file loaded on the newer keyboard and saved there is then in that model’s form. Source: Community report

More: Files from other KN models and Error 00.

What have second-hand KN7000s sold for?

Owners have posted these prices:

  • €3,299 new: the list price in Germany when the KN7000 came out, in 2002
  • a little under €1,100, for one sold in August 2007
  • €505, for one won at auction in September 2018
  • £400, for one bought online in the UK in early 2024, with all four expansion boards

Source: Community report, 2002–2024

They’re reported prices, not valuations.

How do I connect my KN7000 to a computer?

USB carries the keyboard’s sound to the computer, and notes and settings from the computer to the keyboard. The notes played on the keys and the band’s notes (the accompaniment) don’t arrive over USB. They need the MIDI sockets, through a USB-MIDI interface, a cable or small box with MIDI plugs at one end and USB at the other. Source: Tested on a KN7000 A Mac needs no driver. Source: Tested on a KN7000 On Windows, owners report no driver for 64-bit versions. Source: 2 community reports, 2008–2017 For MIDI input, the MIDI IN/BASS PEDAL switch on the back must be set to MIDI IN. Source: Manual, p. 199

More: USB or MIDI doesn’t work with a computer.

Who can repair my keyboard?

The official service centre for Technics keyboards in Germany stopped taking them in 2013, and the maker’s UK and US helplines couldn’t help owners in 2014. Source: Community report, 2013–2014 Owners use local electronics repairers working from the keyboard’s service manual, with parts from donor keyboards. Source: Community report, 2007–2025 Many faults on owners’ forums turned out to be settings, so work through the troubleshooting pages first. Source: Community report, 2004–2026

More: Settings that look like faults and all troubleshooting pages.

How do I silence the keys, or switch the speakers off?

MUTE KEYS, one of the items that can be placed on the FAVORITES screen, silences the keys so a recording plays alone. Source: Manual, p. 32 LOCAL CONTROL set to OFF, on the MIDI menu’s PART SETTING page, silences one part’s keys. Source: Manual, p. 190 MONITOR SETTING, in the SOUND menu, switches the speakers off, and the headphones with them; they come back on at every power-on. Source: Manual, p. 160

More: Settings that look like faults and No sound, or some parts silent.

Corrections and other questions: hello@knarrangers.com

Troubleshooting

Last checked 15 Nov 2026