Troubleshooting · KN7000, KN6500, KN6000, KN5000, KN3500, KN3000, KN2600, KN2000, KN1600, KN1500, KN1400Error messages and numbers

What the error numbers owners meet most often mean, what owners found behind them, and which page deals with each.

Written for: KN7000, KN6500, KN6000, KN5000, KN3500, KN3000, KN2600, KN2000, KN1600, KN1500, KN1400.Also called: error, error number, Error 00, E00, error 0, data for a different product, different product, not made for this item, error 01, error 02, error 002, no disk, error 03, file is empty, error 05, error 06, write protected, error 07, disk full, error 16, error 17, error 18, not a standard MIDI file, error 21, error 29, error 32, memory full, error 43, error 58, error 62, error 81, error 82, no SD card, error 83, bank is empty, drive is empty, error 85, F85, error 86, drive empty, Attention, Transmission Error, No Wave Expansion Board, Sound Name Error, Error in CPU data transmission, CPU error.

The KN7000 shows an error as a number with a short message. The owner’s manual lists the numbers 00 to 71. Source: Manual, pp. 203–204

Numbers 81 to 86 aren’t in that list. Source: Manual, pp. 203–204 Owners report them with SD cards. Source: Community report, 2007–2024

Numbers differ between models. On the KN7000, error 28 means a song is too long to save as a MIDI file, the common file type for songs that keyboards and computers share. Source: Manual, p. 203 On a KN1500, error 28 came up while loading a MIDI file, with the words “rhythm & chord only”. Source: Community report, 2006

This page covers the errors owners meet most, grouped by what the keyboard was doing.

Loading files

Error 00

Error 00 means the file on the disk or card was made for a different product. Source: Manual, p. 203 Owners met it with files made on another model. Source: Community report, 2005–2022

To move a file to a newer model, load it there and save it again. The new save is in that model’s form, and there’s no way back to the older model. Source: Community report KN6000 files, and three of four KN3000 styles (accompaniment patterns) tried, loaded on a KN7000 and were saved again there. Source: Tested on a KN7000

When another model’s save gave error 00 on a KN7000, one owner was advised to set the home page to NO on the load screen’s LOAD OPTION page, so the rest could load. The outcome wasn’t posted. Source: Community report, 2006 The page is described in Load a save from a card or floppy. Source: Manual, pp. 125, 141

Which models load which files: the KN7000 page.

Errors 01 and 02

Both come from the floppy drive. Error 01 means a disk failed to load: try again. Error 02 means the keyboard found no disk in the drive. Source: Manual, p. 203

The checks, in order: The floppy drive says “no disk” or won’t read.

Error 03

Error 03 means the file chosen for loading is empty. Source: Manual, p. 203 On a KN2000, files inside a folder on the disk gave it, and the advice was to put them at the top level of the disk. Source: Community report On the KN7000’s SD card, owners report a similar message as error 83, below. Source: 8 community reports, 2007–2020

Error 43

Error 43 means the file was saved on an earlier KN model, and only its performance data can be loaded. Source: Manual, pp. 198, 203 Performance data is the current panel, the panel memories (stored panel set-ups), the sequencer (the built-in recorder), the composer (the style editor), the edited sounds, the performance pads (buttons that play short phrases) and the effect memories. The backup data, which holds the stored MIDI set-ups, favourites, home page and custom styles, stays out. Source: Manual, p. 122

The kinds of data to load are chosen on the LOAD OPTION page of the load screen: see Load a save from a card or floppy. Source: Manual, pp. 125, 141 The manual says custom styles made on older models don’t load on the KN7000. Source: Manual, pp. 125, 140 KN6000 custom-style sets have loaded on one. Source: Tested on a KN7000

On a KN2000, songs from a KN1000 gave errors 00 and 43. The report has no fix. Source: Community report, 2019

Saving

Saving step by step: Save your work to a card or floppy. For errors when saving to an SD card, see error 85, below.

SD card errors 81 to 86

These numbers come from owners, not the manual, and the words shown with them are as owners reported them. Source: Community report

Error 81

Reported as a card the keyboard can’t read. Source: 5 community reports, 2011–2024 Owners found a faulty card, on a KN2600 where another card worked; files copied onto the card with a computer; and the newest folders on a card becoming unreadable. Source: 3 community reports, 2011–2020

For a failing card, copy off whatever still reads, then replace the card. Source: 3 community reports, 2007–2019 See The SD card isn’t recognised, shows too small or fills early and Files copied from a computer don’t show on the card.

Error 82

Reported with the words “no SD card”. Owners found it with SDHC cards, the larger kind of SD card from 4 GB up, and with some plain SD cards the keyboard didn’t accept. Source: 4 community reports, 2011–2023

Owners use a plain SD card of 2 GB or less, formatted in the keyboard. Source: 30 community reports, 2007–2026 See Prepare a new SD card and The SD card isn’t recognised, shows too small or fills early.

Error 83

Reported with the words “the bank you want to load is empty” or “drive is empty”. Source: 8 community reports, 2007–2020 Owners traced it to files copied onto the card with a computer, which don’t appear on the keyboard, and to a damaged card index, the file on the card that holds the names of its folders and songs. Source: Community report, 2007–2020

See Files copied from a computer don’t show on the card.

Error 85

Shown as 85 or F85 when saving to the card. Source: 2 community reports, 2007–2012 In one report, two new cards gave it and a different card worked. Source: Community report, 2007 The checks owners suggested are under “Saving errors” in The SD card isn’t recognised, shows too small or fills early.

Error 86

Reported as “drive empty” in the card’s audio player, with plain MP3 or WAV files copied onto the card. Source: Community report, 2007–2008 The audio player plays only SD-Audio, a copy-protected audio format written to the card by computer software made for it. Source: 20 community reports, 2005–2025 The manual says the player’s audio is put on the card by a computer. Source: Manual, pp. 138, 143

More in the FAQ: Can I play MP3 or WAV files from the card?

Memory

Loading replaces what’s in the memory it loads into. Save the sequencer’s songs before loading a large file. Source: Manual, p. 202

MIDI files

The KN7000 loads only standard MIDI files whose names end in .MID, in Format 0 or Format 1. Source: Manual, pp. 123, 133

A computer music program can save the file again as Format 0 or Format 1, at one of those timebases. Source: Inferred

The computer connection

Error 62

Error 62 means the computer connection isn’t active because a computer-port switch is set to MIDI. The manual’s remedy is to switch off, set the switch, and switch on again. Source: Manual, p. 204 The KN7000’s back panel, as the manual describes it, has no such switch: the switch it describes there chooses MIDI IN or BASS PEDAL. Source: Manual, p. 199 The KN5000 and KN6000 have a computer switch on the back: see USB or MIDI doesn’t work with a computer. Source: 2 community reports, 2008–2011

Attention, when opening the MIDI menu

On a KN7000, Attention when opening the MIDI menu came from the MIDI IN/BASS PEDAL switch on the back being set to BASS PEDAL. Source: 2 community reports, 2010–2026 Switch off, set it to MIDI IN, and switch on again. Source: Manual, p. 199 The other MIDI checks: USB or MIDI doesn’t work with a computer.

Transmission Error

The data-transfer program on the CD that came with the KN7000 manages the keyboard’s data from a computer over USB. Source: Manual, p. 199 Owners of the KN7000 and KN2600 report “Transmission Error” from it. Source: 3 community reports, 2008–2011 On one KN7000 every upload and backup failed this way, and copying MIDI files through the card’s IMEXPORT folder worked instead. Source: Community report, 2011 The steps are in Files copied from a computer don’t show on the card.

Other messages

No Wave Expansion Board

Expansion boards are optional add-ons with extra sounds, chosen with EW EXPANSION. The manual says a dealer should fit them. Source: Manual, pp. 34–35 Pressing EW EXPANSION on a keyboard with no board fitted shows No Wave Expansion Board. Source: Community report, 2021 The boards: the KN7000 page.

Sound Name Error

Owners of the KN3000, KN3500 and KN5000 saw “Sound Name Error”, or sound names shown as a row of stars. Source: Community report, 2014–2023 One KN5000 that showed it at every power-on needed its main board repaired or exchanged. Source: Community report, 2015–2016 Other cases pointed to the sound circuits or the power supply, with no confirmed fix. Source: Community report, 2014–2023 It’s a repairer’s job. Source: Inferred

Error in CPU data transmission

Owners of the KN6000, KN1400, KN1600 and KN2600 report this message. Source: 8 community reports, 2009–2026

The owners’ checks:

  1. Switch off, leave the keyboard off overnight, and switch on again.
  2. If the keyboard was opened recently, have a repairer check the connections between its boards.

Source: Community report

The two confirmed repairs were in the power feed to the panel’s control circuits. Other suspects were the main board and the connections between boards. All of these are a repairer’s job. Source: 2 community reports, 2018–2026

Other numbers

For error numbers not on this page, see the owner’s manual, pp. 203–204. Source: Manual, pp. 203–204

Corrections and owners' experience: hello@knarrangers.com

All troubleshooting pages · FAQ

Last checked 15 Nov 2026