Troubleshooting · KN7000Files copied from a computer don't show on the card
Why styles, songs and MIDI files copied onto the SD card by a computer don't appear on the keyboard, and the keyboard's own ways of bringing them in.
Owners ask about this more than anything else on the KN7000’s SD card. Source: Community report, 2005–2026
What the keyboard lists
The keyboard lists its own saves, and the MIDI files (standard song files that most keyboards and computers can play) brought in through its own import. Files dragged onto the card on a computer don’t appear in its lists. Source: Community report, 2005–2026
The keyboard keeps the names of its saves in an index file on the card, KN7000MN.INF. Leave that file alone: deleting it makes every save show as a bare number. Source: Community report
Owners who tried to load copied files report error 83, saying the bank or the drive is empty, and sometimes error 81. Source: Community report, 2007–2020 Neither number is in the manual’s list of error messages, which stops at 71. Source: Manual, pp. 203–204
The load screen
MIDI songs on the card are listed apart from the keyboard’s own saves. On the LOAD screen, SD-SOUND shows the MIDI songs and TECH goes back to the saves. A card that holds only MIDI songs opens on the MIDI list. Source: Manual, pp. 140, 142
Before anything goes on a new card
Format a new card in the keyboard and save something to it first. The first save writes the card’s index. Source: Community report Both steps are in Prepare a new SD card.
MIDI files: through the IMEXPORT folder
The KN7000 brings MIDI files in from a folder on the card called IMEXPORT. Source: Manual, p. 152 Owners make the folder at the top level of the card and put the files straight into it: unpacked, not still in a zip file, and not in folders inside it. Source: Community report, 2011–2019
- On the computer, make the
IMEXPORTfolder on the card and copy the MIDI files into it. - Put the card in the keyboard and press SD. The screen shows the SD MENU.
- Choose SD TOOLS. Press SD-SOUND/TECH to show the SD-SOUND tools, then choose SD-SOUND IMPORT. The screen lists the files in the folder.
- Mark each file to bring in with SEL. A star shows beside it. ALL marks every file.
- To name the new playlist, press PLAYLIST NAMING.
- Press OK.
The files become a new playlist: a named list of MIDI songs on the card. The keyboard makes no sound while the import screen shows. Source: Manual, pp. 139, 145, 152
- To play them, choose SD-SOUND PLAY on the SD MENU, and choose the playlist with PLAYLIST SELECT. Source: Manual, p. 144
- To load one into the sequencer, the keyboard’s built-in recorder, use the SD-SOUND list on the LOAD screen. Source: Manual, p. 142
- Playlists, which hold the card’s MIDI and audio songs, are limited to 999 songs, 99 playlists and 99 songs a playlist. Source: Manual, p. 145
MIDI files on a floppy can come in another way. COPY FROM DISK, among the SD-SOUND tools, brings in every MIDI file on the disk at once and puts them in a new playlist. Source: Manual, p. 151
Styles, songs and panel memories: through the floppy drive
Files saved by a Technics keyboard, such as styles (the accompaniment patterns), panel memories (stored panel set-ups), sounds and songs, reach the card through the floppy drive. Source: 2 community reports, 2007–2010 There are two ways.
- Load the floppy, then save to the card. See Load a save from a card or floppy and Save your work to a card or floppy. Source: Manual, pp. 125, 147
- COPY FROM DISK, in SD TOOLS, copies up to 20 saves from the floppy into a folder on the card in one go. It takes a few minutes, and the keyboard makes no sound while this screen shows. Source: Manual, pp. 139, 151 Owners copy into an empty folder. Source: Community report, 2007–2010
Files on a computer reach a floppy through a USB floppy drive. Owners put them at the top level of the disk, not in a folder, and unpacked. Source: 2 community reports, 2015–2016 Disks formatted in the keyboard give the least trouble: see The floppy drive says “no disk” or won’t read. Source: Community report
Whole cards
Copying a card’s whole contents onto an empty card keeps the keyboard’s saves and their names. Owners use this to back up a card or move a collection to a new one. Source: Community report, 2013
A card that worked now shows empty
Owners report cards that worked showing empty folders, saves as bare numbers, or error 83. Source: 7 community reports, 2006–2024
- Switching off, or taking the card out, while the SD IN USE light by the slot is on can lose data. Source: Manual, p. 139 One owner lost a card’s contents this way. Source: Community report, 2016
- Saves showing as bare numbers point to a damaged or missing index file. Source: Community report
- The card itself may be failing: see The SD card isn’t recognised, shows too small or fills early. Source: Community report
Copy the whole card to a computer before trying anything else, and keep the copy. Source: Community report, 2008 A whole-card copy made while the card still worked brings the saves back when copied onto an empty card, so a copy now and then guards against this. Source: Community report, 2008–2013
When to call a repairer
Not for files that don’t show. Owners traced them to how the files reached the card, or to the card itself. Source: Community report, 2005–2026
Related
- Prepare a new SD card
- Load a save from a card or floppy
- Save your work to a card or floppy
- The SD card isn’t recognised, shows too small or fills early
- The floppy drive says “no disk” or won’t read
Corrections and owners' experience: hello@knarrangers.com
All troubleshooting pages · FAQ
Last checked 15 Nov 2026