Technics KN7000 · MIDIRecord the KN7000 into a sequencer or computer over MIDI
Recording over MIDI
MIDI is the standard way keyboards, computers and other instruments send notes and settings to each other. It carries which keys are played and how hard, and changes of sound and of controls such as volume and sustain. Source: Manual, p. 188
A sequencer, or recording software on a computer, records that MIDI. It doesn’t record the KN7000’s sound: the MIDI sockets don’t carry it. Source: Tested on a KN7000 To record the sound itself, use the USB connection: see Connecting a computer on the KN7000 page.
Connections
- A sequencer needs two MIDI cables: the KN7000’s MIDI OUT to the sequencer’s MIDI IN, and the sequencer’s MIDI OUT to the KN7000’s MIDI IN. Source: Manual, p. 187
- The switch marked MIDI IN / BASS PEDAL on the back must be on MIDI IN for the KN7000 to take MIDI in. Switch the keyboard off before moving it. Source: Manual, pp. 187, 199
- A computer connects through the MIDI sockets with a USB-MIDI cable. The notes played on the keys, the left-hand chord and the band’s notes come out of the MIDI sockets, not the USB socket. Tempo, start and stop, and button changes come out of both. Source: Tested on a KN7000
- COMPUTER CONNECTION, on the MIDI menu, stays on NORMAL for this. Source: Tested on a KN7000 The manual’s diagram for NORMAL shows the keyboard’s output going to USB as well as MIDI OUT. Source: Manual, p. 196 At the keyboard, the played notes came only from the MIDI sockets. Source: Tested on a KN7000
Two ways to record
- Track by track: the KN7000’s keys go to the sequencer, and the sequencer plays the KN7000’s sounds. This uses the EXTERNAL SEQUENCER preset on page 1 of MIDI PRESETS, without the band. Source: Reference Guide, p. 51
- With the band: the KN7000 plays as usual and sends what’s played and the band’s parts to the sequencer. This uses the external-sequencer set-up on page 2, where the KN7000 is the master, with WITH APC. Source: Reference Guide, p. 48
A MIDI preset is a ready-made set of MIDI settings for one kind of connection: see Connect an organ, accordion, PX piano or bass pedals with a MIDI preset. Choosing one changes the KN7000’s MIDI settings, so store the usual set-up first: see Keeping your own MIDI set-up. Source: Manual, pp. 194–195
Track by track
The EXTERNAL SEQUENCER preset is made for recording several tracks with a sequencer or computer. Source: Reference Guide, p. 51
- It sets every part to local off: the keys send MIDI but don’t play the KN7000’s own sound. Source: Reference Guide, p. 51 Source: Manual, p. 190
- So turn on MIDI thru in the sequencer or software. It sends the notes straight back, and the KN7000 plays them. Source: Reference Guide, p. 51
- It sets the clock to MIDI: the KN7000 takes its tempo from the sequencer. Source: Reference Guide, p. 49 Source: Manual, p. 191
- The band’s parts get no channel, so they aren’t sent to the sequencer or played from it. Source: Reference Guide, p. 49 Source: Manual, p. 190
- Right 1, Right 2 and Left, the three parts played on the keys, send and receive on channels 1, 2 and 3. Tracks sent back on channels 4 to 16 play Parts 4 to 16, the KN7000’s parts for notes received over MIDI. Source: Reference Guide, p. 49 Source: Manual, p. 34
- Connect both MIDI cables.
- Press PROGRAM MENUS to turn it on, choose MIDI, then MIDI PRESETS.
- On page 1, press WITHOUT APC below the screen.
- Choose EXTERNAL SEQUENCER with ▲ and ▼, and press OK. The screen shows COMPLETED!.
- In the sequencer or software, turn on MIDI thru for the KN7000.
- Record each part on its own track and channel.
Until MIDI thru is on, the KN7000’s keys make no sound. Source: Manual, p. 201
With the band
On page 2, the external-sequencer set-up with WITH APC gives the band’s accompaniment, bass and drum parts channels of their own. It also turns on sending them, along with what’s played on the keys. Source: Reference Guide, p. 48 Source: Manual, p. 194
The KN7000 keeps its own tempo and its own sound. Source: Reference Guide, p. 48 Its tempo, start and stop reach the sequencer through either connection. Source: Tested on a KN7000
- Connect both MIDI cables.
- Press PROGRAM MENUS, choose MIDI, then MIDI PRESETS.
- Press PAGE to go to page 2.
- Press WITH APC, choose the set-up for an external sequencer, and press OK.
- In the sequencer or software, turn MIDI thru off for the KN7000.
- Start recording, then play with the style as usual.
With the KN7000’s own sound on, MIDI thru plays every note twice. The sound can then waver or notes cancel each other out. Turn MIDI thru off in the software, or set LOCAL to off on the KN7000. Source: Manual, p. 202
Afterwards
- The KN7000 sets its clock back to INTERNAL each time it’s switched on. Source: Manual, p. 191
- If the style won’t start, the clock may still be on MIDI. Set CLOCK to INTERNAL on the MIDI menu’s REALTIME MESSAGES screen. Source: Manual, pp. 191, 201
- With local off and no sequencer sending the notes back, the keys stay silent. Recall a stored user setting, or set LOCAL back to ON for each part on the MIDI menu’s PART SETTING screen. Source: Manual, pp. 190, 195, 201
- To put only the MIDI settings back to factory, see Return settings to factory, all or only MIDI.
Related
To record on the keyboard itself, without a computer, see Record with Easy Record.
Manual pages
KN7000 Reference Guide, pp. 48–51.
Corrections: hello@knarrangers.com
Guide I15 · last checked 18 Nov 2026