Technics KN7000 · MIDIConnect an organ, accordion, PX piano or bass pedals with a MIDI preset

From the manual Not yet tested on a KN7000.Also called: MIDI preset, MIDI presets, connect an organ, organ to keyboard, MIDI accordion, accordion MIDI, bass pedals, MIDI pedals, pedalboard, PX piano, master and slave, WITH APC, WITHOUT APC, user setting, USER MIDI.

MIDI presets

MIDI is the standard way keyboards, computers and other instruments send notes and settings to each other. A MIDI preset is a ready-made set of the KN7000’s MIDI settings for one kind of connection. Source: Manual, pp. 188, 194

The instrument being played is the master: it sends. The instrument it plays is the slave: it receives. A MIDI cable runs from the master’s MIDI OUT socket to the slave’s MIDI IN socket. Source: Reference Guide, p. 50

To play the KN7000 from an organ, an accordion, a PX piano or bass pedals, the KN7000 is the slave. Its set-ups for this are on page 1 of the MIDI PRESETS screen. Page 2 holds set-ups with the KN7000 as the master. Source: Manual, p. 194

Both pages have two lists, chosen with the buttons below the screen. APC is Auto Play Chord, the KN7000’s band following the chords it’s given. On page 1:

  • WITH APC: the band follows the chords played on the other instrument.
  • WITHOUT APC: the other instrument plays the KN7000’s sounds, and its chords don’t drive the band.

Source: Manual, p. 194

Right 1, Right 2 and Left are the three parts played on the keys, each with its own sound. Source: Manual, p. 34

Before choosing a preset

Choosing a preset

The SEQUENCER, DISK and SD buttonsSEQUENCERPLAYEASY RECDISKPROGRAMMENUS3LOADDISKIN USESDLOAD
PROGRAM MENUS, next to DISK. The yellow number matches step 3. Drawn from a KN7000.
  1. Connect a MIDI cable from the other instrument’s MIDI OUT to the KN7000’s MIDI IN.
  2. Check that the MIDI IN / BASS PEDAL switch on the back is on MIDI IN.
  3. Press PROGRAM MENUS to turn it on, and choose MIDI.
  4. Choose MIDI PRESETS. Page 1 of 4 opens, with the set-ups that have the KN7000 as the slave.
  5. Press WITH APC or WITHOUT APC below the screen.
  6. Choose the set-up with the ▲ and ▼ buttons.
  7. Press OK. The screen shows COMPLETED!.

Source: Manual, pp. 187, 189, 194

With WITHOUT APC, page 1 lists ORGAN, ORGAN FIXED TOUCH, PX PIANO, ACCORDION, BASS PEDAL and EXTERNAL SEQUENCER. Source: Manual, p. 194

The Reference Guide gives the full settings of every preset in two tables. Source: Reference Guide, pp. 48–49

What each preset does

Organ

  • With APC, the organ’s upper keyboard plays Right 1 and Right 2, and its lower keyboard gives the chords for the band. The Organ 1 preset also plays the Left sound from the lower keyboard. Organ 2 uses the lower keyboard for the chords only. Source: Reference Guide, p. 50
  • With APC, the organ presets set the KN7000 to follow the organ’s MIDI clock. The organ’s start/stop button then starts and stops the KN7000’s style, and the organ sets the tempo. Source: Reference Guide, p. 50
  • Turn the organ’s own rhythm and accompaniment volumes down to zero, so that the two bands don’t clash. Source: Reference Guide, p. 50
  • Without APC, the upper keyboard plays Right 1 and Right 2, the lower keyboard plays Left, and the pedals play Part 4. Source: Reference Guide, p. 50
  • The fixed-touch versions work as Organ 1 and as the organ preset without APC, but every note plays at the same velocity, for playing without touch sensitivity. Source: Reference Guide, p. 50 The Reference Guide’s settings table differs on one point: it gives the fixed-touch preset with APC no channel for Left, as for Organ 2. Source: Reference Guide, p. 48 Velocity is MIDI’s measure of how hard a key is struck. Source: Manual, p. 188 The Reference Guide’s tables give the fixed value as 80. Source: Reference Guide, pp. 48–49

PX piano

Accordion

  • In every accordion preset, the right-hand keys play Right 1 and Right 2. Source: Reference Guide, p. 51
  • With APC, the chord buttons give the chords for the band. The Accordion 1 preset puts the bass buttons on Left. Accordion 2 puts them on Part 4, and the chord buttons also play Left. Accordion 3 puts them on Part 4 and leaves Left unused. Source: Reference Guide, pp. 48, 51
  • Without APC, the chord buttons play Left and the bass buttons play Part 4. Source: Reference Guide, p. 51
  • Every accordion preset fixes the velocity at 80. An accordion sends 64, so the notes come out louder. Source: Reference Guide, p. 51
  • VELOCITY INPUT, on the MIDI menu’s INPUT/OUTPUT SETTING screen, sets how the touch of incoming notes is used: as sent (DIRECT), raised or lowered by up to 50 (OFFSET), or fixed at one value from 1 to 127 (FIX). Source: Manual, p. 193

Bass pedals

  • With APC, the pedals play the band’s bass. The style’s own bass line is silenced, and the pedals play its bass sound instead. Source: Reference Guide, p. 51
  • Without APC, the pedals play Part 4, and the hands play Right 1, Right 2 and Left on the KN7000’s keys, as on an organ. Source: Reference Guide, p. 51
  • Without a preset: with the switch on the back set to BASS PEDAL, a MIDI pedal unit plays the KN7000’s BASS PEDAL part, whatever channel it sends on. The KN7000’s MIDI input settings then don’t work. Source: Manual, p. 199

Part 4

Part 4 is one of the KN7000’s 16 parts for notes received over MIDI. Source: Manual, p. 34 Its sound is set in PROGRAM MENUS, SOUND, PART SETTING: choose the part with the PART SELECT ∧ and ∨ buttons, then the sound with the SOUND ∧ and ∨ buttons. The BASS PEDAL part’s sound is set in the same place. Source: Manual, pp. 153–154, 199

After choosing a preset

Keeping your own MIDI set-up

The MIDI PRESETS screen has three user settings for storing MIDI set-ups. They’re kept with the power off, and the INITIAL reset leaves them alone. Source: Manual, pp. 195, 197, 198

To store the current set-up:

  1. On the MIDI PRESETS screen, press PAGE to go to page 4 of 4.
  2. Choose USER SETTING 1, 2 or 3 with ▲ and ▼.
  3. Press WITH SPLIT POINT? to choose whether the split point is stored too (YES or NO).
  4. Press WRITE.

To recall it:

  1. On the MIDI PRESETS screen, go to page 3 of 4.
  2. Choose the user setting with ▲ and ▼.
  3. Press OK.

Source: Manual, p. 195

Recalling a stored user setting has put a whole MIDI set-up back at the keyboard, after old floppies had switched every MIDI channel off. Source: Tested on a KN7000

To put only the MIDI settings back to factory, see Return settings to factory, all or only MIDI.

Manual pages

KN7000 Reference Guide, pp. 48–51.

Corrections: hello@knarrangers.com

All KN7000 guides

Guide I14 · last checked 18 Nov 2026