Technics KN6000
What it is
The KN6000 is the arranger keyboard two models before the KN7000, with the KN6500 between them. An arranger keyboard has built-in accompaniment, called styles, that follows the chords played with the left hand. Source: Manual, p. 192 It was first on sale in Germany in 1999, the KN6500 in 2001 and the KN7000 in 2002. Source: Community report
- 61 keys, sensitive to how hard they’re played and to pressure after the note (aftertouch); up to 64 notes at once.
- 1,008 sounds, 33 drum kits and 2 digital drawbar organs.
- 200 styles, each with 4 variations, in 14 groups.
- 13 banks of 8 panel memories. A panel memory stores the panel’s settings for recall later.
- A 16-track recorder, called the sequencer, holding 10 songs.
- A floppy drive; MIDI in, out and thru; and a serial computer port.
Source: KN6000 owner’s manual, pp. 159, 178, 185–186
The guides on this site are written for the KN7000. Where the KN6000 differs, this page says so.
Different from the KN7000
- Floppy only. There’s no SD card slot. Source: KN6000 owner’s manual, pp. 118, 185
- Half the polyphony: 64 notes, against the KN7000’s 128. Source: KN6000 owner’s manual, p. 185 Source: Manual, p. 207
- No USB. The computer port on the back is a serial port for old Mac and PC cables. Source: KN6000 owner’s manual, pp. 178, 186
- No expansion boards in its manual. The KN6500, the next model, has two slots. Source: KN6000 owner’s manual, p. 33 Source: KN6500 owner’s manual, p. 33
- A trackball, the SOUND CONTROLLER, at the left end of the panel. Rolling it changes the sound as it plays, such as its brightness or effect depth, depending on its mode. The KN7000 has none. Source: KN6000 owner’s manual, pp. 8, 14, 43
- No ORGAN TABS button. The DIGITAL DRAWBAR and ACCORDION REGISTER buttons are there. Source: KN6000 owner’s manual, pp. 33, 185
- The first chord mode is called ONE FINGER. The KN7000 calls it BASIC. Source: KN6000 owner’s manual, pp. 52–55
- Different style groups. Only four group names are shared with the KN7000: 8 & 16 Beat, Ballad, Modern Dance, and March & Waltz. Source: KN6000 owner’s manual, p. 185
- No speaker on/off setting. The KN7000’s MONITOR SETTING isn’t on the KN6000’s menus. Plugging in headphones switches the speakers off. Source: KN6000 owner’s manual, pp. 10, 134
- User pads keep for about a week with the power off. On the KN7000 they keep for about 80 minutes. Source: KN6000 owner’s manual, p. 177 Source: Manual, p. 198
- Different buttons for the power-on reset, which returns everything to factory settings and erases the memory. When and how to reset gives them, with the warning. Source: KN6000 owner’s manual, pp. 176, 179
- No slide show. The KN7000 can show pictures, BMP or JPEG at 640 × 240, at set points in a sequencer song. Source: Manual, pp. 77, 91 The KN6000’s manual has no such feature. Source: KN6000 owner’s manual, p. 162 The home-page picture is the same on both: a BMP of 160 × 100 pixels. Source: KN6000 owner’s manual, p. 162 Source: Manual, p. 182
- Not on the KN6000: video out, line in and the two sub outputs. Source: KN6000 owner’s manual, p. 186
Loading and saving
Saves go to 3.5-inch floppy disks, 2HD (1.44 MB) or 2DD (720 KB). A disk holds 20 numbered saves. Source: KN6000 owner’s manual, pp. 118, 121, 127
A save holds the same kinds of data as on the KN7000, in two groups. Source: KN6000 owner’s manual, pp. 127–128, 177
- Performance: the current panel, panel memories, sequencer, composer, sound memory, the pads’ user banks and effect memory.
- Backup: the user MIDI settings, favourites, home page and all custom styles. Backup data needs a 2HD disk. Source: KN6000 owner’s manual, p. 118
With the power off, the keyboard keeps: Source: KN6000 owner’s manual, p. 177
- the current panel, panel memories, sound memory, user pads and effect memory for about a week;
- the sequencer and composer for about 80 minutes;
- the user MIDI settings, favourites, home page and custom styles indefinitely.
The memory only holds once the keyboard has been on for about 10 minutes. Save anything you want to keep to a disk. Source: KN6000 owner’s manual, p. 177
- Loading replaces what’s in the memory it loads into. Source: KN6000 owner’s manual, pp. 121, 180
- One item can be loaded from a save on its own: a panel memory, composer memory, sound memory or effect memory, or the song from a one-song save. Source: KN6000 owner’s manual, pp. 118, 122
- Custom styles save and load one at a time as well as all together. Source: KN6000 owner’s manual, p. 130
- MIDI files: only files ending
.MIDload. Format 0 and Format 1 load; the keyboard saves Format 0. A saved MIDI file keeps the notes, not the chords or the style. Source: KN6000 owner’s manual, pp. 119, 122, 129 - MIDI-file disks play straight from the floppy without loading, with the words on screen where the file has them. Disk Orchestra Collection and PianoDisc disks play this way too. Source: KN6000 owner’s manual, pp. 15, 119, 123–125
Disks supplied with it
- Initial Data Disk: puts back the factory custom styles, user MIDI settings, favourites and home page. Source: KN6000 owner’s manual, p. 133
- Style Convert Disk: loads styles from other keyboards into the composer. With Technics-type styles it overwrites all three composer memories, and sometimes the sound memory. Very large styles may not load. Source: KN6000 owner’s manual, p. 133 A 1999 copy of the disk converts styles from GEM, Korg, Roland and Solton keyboards, and from the KN800 and KN1000. Source: From original disks
Files from other KN models
- KN6000 files load on a KN7000, custom-style sets included. Once saved again on the KN7000 they’re in KN7000 form. Source: Tested on a KN7000
- The KN6000 refuses KN7000 files. Source: Community report Its message for this, error 00, says the data is for a different product. Source: KN6000 owner’s manual, p. 181
- Data from older Technics models may load only as performance data. Error 43 asks for the PERFORMANCE option. Source: KN6000 owner’s manual, pp. 177, 181
- A one-song sequencer file from an older model goes into song 1 and erases songs 2 to 10. Custom rhythms from older models don’t load. Source: KN6000 owner’s manual, p. 121
Connecting a computer
The KN6000 has no USB. Its MIDI sockets work with a USB-MIDI interface, the usual route to a computer today. Source: Inferred
- The COMPUTER port on the back has a switch with four positions: MIDI, PC1, PC2 and MAC. PC2 and MAC are for a serial cable to a PC or a Mac; the manual doesn’t say what PC1 is for. Source: KN6000 owner’s manual, p. 178
- The switch must be on MIDI for the MIDI sockets to work. Switch the keyboard off before moving it. Source: KN6000 owner’s manual, pp. 166, 178, 180
- Error 62 means the computer connection isn’t active because the switch is on MIDI. Source: KN6000 owner’s manual, p. 182
- If notes double or cut each other off with a computer, the computer program may be sending the notes back. Turn off the echo in the computer program, or set the part’s LOCAL CONTROL off. Source: KN6000 owner’s manual, p. 180
What to watch for
- A style won’t start: CLOCK on the MIDI menu may be set to MIDI, so the keyboard waits for another instrument. Set it to INTERNAL. Source: KN6000 owner’s manual, pp. 170, 179
- No sound from the keys: the main volume or the part’s volume is down, the part is muted, or its LOCAL CONTROL is off. Only drums from the keys means the DRUM KITS sound group is on. Source: KN6000 owner’s manual, p. 179
- Nothing over MIDI: the COMPUTER switch isn’t on MIDI, or the channels don’t match. Source: KN6000 owner’s manual, p. 180
More: Troubleshooting, which says which models each page covers.
Not known yet
- Whether any KN6000 takes expansion boards. Its manual doesn’t mention them, and owners have reported that it takes two.
- Which older models’ files it loads. For the KN6500 and KN7000 that list is in the Reference Guide, a separate booklet. No copy of the KN6000’s has been found.
- Nothing on this page has been tried on a KN6000. Only KN6000 files have been tested, on a KN7000.
Last checked 18 Nov 2026