Technics KN7000 · Setup and careFind which menu holds a setting
The menus
Many of the KN7000’s settings are on screens reached through menus. Four panel buttons open them:
- PROGRAM MENUS opens eight menus: SOUND, REVERB & EFFECT, CONTROL and MIDI on the left of the screen, SOUND EDIT, SEQUENCER, COMPOSER and PERFORMANCE PADS on the right. Source: Manual, p. 30
- CUSTOMIZE opens one menu, for the display, favourites, language and how loads treat settings. Source: Manual, p. 181
- SD and DISK each open a menu for the SD card or the floppy: loading, saving, tools and preferences. Source: Reference Guide, p. 3
The Reference Guide’s Display Guide, on pages 2 and 3, maps the screens in these menus. Source: Reference Guide, pp. 2–3
Opening a setting
- Press PROGRAM MENUS to turn it on. The screen shows PROGRAM MENUS.
- Press the button beside the menu’s name, either side of the screen.
- Choose the setting from the menu in the same way. Its settings screen opens.
- When finished, press PROGRAM MENUS again to turn it off.
Source: Manual, pp. 30, 31, 178
- EXIT goes back to the previous screen. Source: Manual, p. 31
- When the TEMPO/PROGRAM light is on, the dial changes the value on the screen. Source: Manual, p. 31
Where to look
Some settings, and where they are:
| To change | Menu | Screen |
|---|---|---|
| The tuning of the whole keyboard | SOUND | MASTER TUNING |
| Each part’s sound, volume, pan and effects, side by side | SOUND | MIXER |
| Which settings a new sound brings with it | SOUND | SOUND LOAD OPTION |
| The overall tone (equaliser) | REVERB & EFFECT | EQUALIZER |
| How the keys respond to touch | CONTROL | OVERALL TOUCH SENSITIVITY |
| What the pedals and foot switches do | CONTROL | FOOT CONTROLLERS |
| A reset to factory settings | CONTROL | INITIAL |
| Each part’s MIDI channel | MIDI | PART SETTING |
| Stored MIDI set-ups | MIDI | MIDI PRESETS |
| Copying a composer memory into a CUSTOM style | COMPOSER | CUSTOM STYLE COPY |
| The display’s background | CUSTOMIZE | WALLPAPER SETTING |
| How long messages stay on the screen | CUSTOMIZE | DISPLAY TIME OUT |
| Settings to protect from loads and automatic set-ups | CUSTOMIZE | DATA PROTECTION |
| Loading or saving custom styles | SD or DISK | CUSTOM STYLE LOAD/SAVE |
Source: Reference Guide, pp. 2–3
Guides for some of these screens:
- SOUND LOAD OPTION: Choose a sound, including the extra Sound Explorer list
- INITIAL: Return settings to factory, all or only MIDI
- WALLPAPER SETTING: Change the display’s wallpaper
Names that appear twice
- MIXER and SOUND LOAD OPTION are in both the SOUND and the REVERB & EFFECT menus. Source: Reference Guide, p. 2
- PART SETTING is in both SOUND and MIDI, as two different screens. The SOUND one holds each part’s sound settings, such as volume and tuning. The MIDI one holds each part’s MIDI channel. Source: Manual, pp. 154, 190
- The REVERB, CHORUS, MULTI and SOUND DSP screens in REVERB & EFFECT are the same ones that open when their panel button is held. Source: Manual, pp. 43–44, 162
- In the same way, FADE IN/OUT SETTING, PANEL MEMORY MODE and MUSIC STYLE ARRANGER MODE in CONTROL open by holding FADE IN or FADE OUT, SET or MUSIC STYLE ARRANGER. Source: Manual, pp. 59, 64–65, 67 See Jump straight to a setting by holding its button.
Not on the map
The owner’s manual’s picture of the CUSTOMIZE menu also shows VIDEO OUT SETTING, which the Reference Guide’s map leaves out. It chooses PAL or NTSC for the VIDEO OUT socket, for showing slide shows or lyrics on a TV or video monitor. The choice is kept after switching off. Source: Manual, pp. 181, 186
Other ways in
- HELP explains any panel button. Press HELP, choose a language and press OK, then press the button. Press HELP again to leave. Source: Manual, p. 32
- FAVORITES holds four screens of favourite sounds, styles and functions, set up with FAVORITES SETTING. Source: Manual, p. 32
Manual pages
KN7000 Reference Guide, pp. 2–3.
Corrections: hello@knarrangers.com
Guide H16 · last checked 18 Nov 2026